Ultra Voice Changer

Discover your Robot,Alien,Chipmunk,Helium voices !
Free technical support is available, for this app, if you email me.
If you get abnormal playback results, even with the Normal voice effect, your
device may not be able to record properly in stereo mode. To rule this out, within the app, try selecting the 44100 mono (or 22050 mono) recording mode, via Menu->Prefs.
NOTE: When recording, try using different recording volume levels (look for the recording volume control within the app) in order to find the levels that work best for your device. The default recording level of 1 may not be optimal for your device, so you may need to play around with that setting to get good recordings..
If you hear excessive static during playback, try lowering your recording volume and make a new recording using this lower recording volume setting.

TROUBLESHOOTING CHECKLIST:
If you are unable to record audio using this app, try the following:
CHECK 1: Speak closely into the microphone.
CHECK 2: Raise the speaker volume on your phone/device.
CHECK 3: Raise the recording volume from within the app.
CHECK 4: Also, if you have a bluetooth headset and you are not able to record audio or just get static, try turning your bluetooth headset off and see if that resolves the issue.
CHECK 5: From within the app, try selecting a different audio recording rate, via Menu->Prefs. Supported audio recording rates include: 44100 stereo, 22050 stereo, 11025 stereo, 44100 mono, 22050 mono, 11025 mono, 48000 stereo, 48000 mono, 8000 mono. Depending on your device, only a subset of these recording rates may be available to you.